Products / Nickel Alloys

Nickel 200, for caustic and the chemistries nothing else tolerates.

Commercially pure nickel, 99.6% minimum. The standard material for handling sodium and potassium hydroxide at any concentration and temperature short of molten, and a clean, non-contaminating choice for food, pharmaceutical, and electronics chemicals.

AlloyAlloy 200 Nickel 200 (N02200)
FamilyNickel Alloys
Supplied toASTM B161, ASTM B163, ASME SB-163
Typical serviceCaustic service, Food processing
Size range1/4" to 2" OD, .028" to .134" wall
TempersAnnealed, or stress relieved
Testing100% eddy current or ultrasonic per B163, hydrostatic, flattening, flaring
OriginDomestic and approved mills, inspected and certified in Hillsboro
Sourced alloy, certified in HillsboroAmeritube does not manufacture Alloy 200 in Texas. It is supplied from qualified domestic and international mills, then received, inspected, tested, and released under our ISO 9001:2015 system in Hillsboro, Texas, with a full mill test report.

What Nickel 200 is

Nickel 200 is wrought commercially pure nickel. Its defining property is near-total resistance to caustic alkalis, including hot concentrated sodium hydroxide where even the best stainless and nickel-chrome alloys corrode. It also resists neutral and alkaline salts, dry halogens, and many organic chemicals, and it does not contaminate the product it touches.

Nickel 200 or 201

Above about 600 degrees F, the carbon in Nickel 200 can precipitate as graphite and embrittle the metal. Nickel 201, with carbon held to 0.02% max, is specified for higher-temperature caustic evaporators and similar service. Tell us the temperature and we will quote the right one.

Standards we supply to

  • ASTM B161, seamless nickel pipe and tube
  • ASTM B163 / ASME SB-163, condenser and heat exchanger tube
  • ASTM B725 and B730 welded on request

Chemical composition

Element Requirement
Nickel (plus cobalt) 99.0% min
Copper 0.25% max
Iron 0.40% max
Manganese 0.35% max
Carbon 0.15% max

Typical mechanical properties, annealed

Property Value
Tensile strength 55,000 psi min (380 MPa)
Yield strength 15,000 psi min (105 MPa)
Elongation in 2" 40% min

Where it is used

  • Caustic soda and potash evaporators, heaters, and piping.
  • Chlor-alkali plant equipment.
  • Food processing and pharmaceutical exchangers where product purity is critical.
  • Electronic and semiconductor chemical handling.
  • Fluorine and dry chlorine handling.
What to put in your Alloy 200 RFQ

OD, wall, length, quantity, ASTM B161 (general) or B163 (condenser and heat exchanger), temper, design temperature (above 600 degrees F consider Nickel 201), and the process chemistry.

Documents

Related alloys

Industries