Products / Stainless & Duplex

SA789 duplex 2205, twice the strength, none of the chloride cracking.

Half ferrite, half austenite. Duplex 2205 combines the chloride stress corrosion immunity of ferritic stainless with the toughness and weldability of austenitic, and it does it at roughly double the yield strength of 316L. The alloy that replaces 316L bundles that keep cracking.

AlloySA789 S32205 / S31803 Duplex Stainless
FamilyStainless & Duplex
Supplied toASME SA789, ASTM A789
Typical serviceChloride stress-cracking service, Offshore, Chemical process
Size range1/2" to 3" OD, .049" to .220" wall, straight lengths and U-bends
TempersSolution annealed and quenched per SA789
Testing100% eddy current or ultrasonic per SA789, hydrostatic, flattening, flaring; ferrite count, ASTM A923 microstructure and impact tests, and G48 pitting test on request
OriginDomestic and approved import mills, inspected and certified in Hillsboro
Sourced alloy, certified in HillsboroAmeritube does not manufacture SA789 S32205 / S31803 in Texas. It is supplied from qualified domestic and international mills, then received, inspected, tested, and released under our ISO 9001:2015 system in Hillsboro, Texas, with a full mill test report.

What SA789 duplex is

ASME SA789 covers seamless and welded ferritic-austenitic (duplex) stainless steel tube. Grade 2205, UNS S32205 or the older S31803 designation, is the workhorse: 22% chromium, 5% nickel, 3% molybdenum, and nitrogen, balanced to roughly 50/50 ferrite and austenite. That microstructure gives it a pitting resistance equivalent number around 35, immunity to chloride stress corrosion cracking in most service, and a yield strength of 65,000 psi minimum.

Why it replaces 316L

316L bundles in warm chloride water fail by stress corrosion cracking, often within a few years. Duplex 2205 does not crack under those conditions, resists pitting better than 316L, and its higher strength allows thinner walls, which partly offsets the higher alloy cost. For Gulf Coast cooling water, offshore process, and produced water service, it is frequently the lowest life-cycle-cost option.

Chemical composition, S32205

Element Requirement
Chromium 22.0 to 23.0%
Nickel 4.5 to 6.5%
Molybdenum 3.0 to 3.5%
Nitrogen 0.14 to 0.20%
Carbon 0.030% max

Mechanical properties

Property Minimum
Tensile strength 95,000 psi (655 MPa)
Yield strength 65,000 psi (450 MPa)
Elongation in 2" 25%
Hardness 30.5 HRC max

Where it is used

  • Offshore platform and FPSO process coolers and produced water exchangers.
  • Refinery and petrochemical exchangers on brackish cooling water.
  • Chemical process heat exchangers in chlorides and organic acids.
  • Pulp and paper, desalination, and flue gas desulfurization.
  • Sour service under NACE MR0175 within its hardness and temperature limits.

Case study

Ameritube supplied duplex U-bend tube for a heat exchanger rebuild where 316L had cracked repeatedly. See the case studies PDF on the resources page for the details.

What to put in your SA789 S32205 / S31803 RFQ

S32205 or S31803 (S32205 is the tighter, preferred chemistry), seamless or welded, OD, wall, length or U-bend schedule, quantity, ferrite range, and any A923, G48, or NACE MR0175 requirement. U-bend heat treatment needs are important, state them.

Documents

Related alloys

Industries

304L, 316L, or duplex 2205?

Tap an alloy to open its page
PropertyTP304 / 304LStainless SteelTP316 / 316LStainless SteelSA789 S32205 / S31803Duplex Stainless
MolybdenumNone2 to 3%3 to 3.5%
Chloride pitting resistanceLowModerateHigh
Chloride stress corrosion crackingSusceptibleSusceptibleResistant
Yield strength25 ksi min25 ksi min65 ksi min
Relative costLowestHigherHigher, but thinner wall possible
Typical pickFresh water, food, mild processBrackish water, chemical processWarm chlorides, offshore, where 316L cracked
Not sure? Put the service conditions in the quote notes and we will recommend the alloy.